Milmax
3305 Mill-max Hotswap Sockets
Pickup available at Yu Li Industrial Building
Usually ready in 24 hours
Kindly note that 1 qty = 36 milmax sockets.
Milmax sockets offer a balance between the original solder experience and the hot-swap experience that sacrifices sound quality.
Introducing Mill-Max's latest creation: the 3305-X hots-wap receptacles!
These innovative, low-profile receptacles are designed to make your mechanical key switches easily swappable.
They can be soldered into a small .060” (1,50mm) mounting hole and their ultra-thin shoulder allows plugged-in components to sit flush with the board surface.
Its open-bottom design can also accommodate various lead lengths, making it a versatile choice.
Kindly do your due diligence before purchasing. These sockets are basically to help convert a solder-only PCB into a pseudo hot-swap PCB. Base your purchase decisions on the provided specifications.
All sales are final.
Specifications:
Manufacturer: Mill-Max Manufacturing Corp.
Type: Solder-Mount
Length - Overall: 0.105" (2.67mm)
Accepts Pin Diameter: 0.025" ~ 0.037" (0.64mm ~ 0.94mm)
Accepts Square Pin Size: 0.025" (0.64mm)
Pin Hole Diameter: 0.051" (1.30mm)
Mounting Hole Diameter: 0.060" (1.52mm)
Flange Diameter: 0.077" (1.96mm)
Contact Material: Beryllium Copper
Contact Finish: Gold
Contact Finish Thickness: 30.0µin (0.76µm)
Operating Temperature: -55°C ~ 125°C
Datasheet: 3305-0-15-80-47-27-10-0 Datasheet
Environmental Information: RoHS Cert
Prices are for individual sockets.
ONLY PURCHASE THESE SOCKETS IN MULTIPLES OF 50.
FAILURE TO DO SO WILL INCUR A CANCELLATION CHARGE OF 4% OF ORDER.
1 Mechanical Switch uses 2 Sockets.
Kindly do your research before purchasing.
QC Standards
PBTfans Keycap QC Standard: Link
Some UV products will exhibit wear over time, which is considered normal due to the UV printing. Furthermore, slight misalignment of the UV pattern is possible, and absolute center alignment or perfection cannot be guaranteed.
Disclaimer
1. The keyboards are for visual illustration purposes and are not a part of this set.
2. These keycaps are semi-transparent; therefore, renders could illustrate inaccurate colour, surface texture, and degree of transparency.
3. The inner layer for the actual set would potentially have visible holes.These holes are not defects but manufacturing constraints from the double shot injection moulding process.
