Keygeek
Keygeek Cera Linear Switches
products.product.pickup_availability.unavailable
Description
Keygeek Cera Linear switch is keygeek's another full POM switch.
Unlike POMkin, Cera has a flat pole tip for a more clacky and crispy sound profile. Gearpod also commissioned a new housing mold for them. Because full POM switches tend to have more surface friction, the sizes of the top housing opening and bottom housing stem hole have been adjusted to make sure the stem wobble is minimal while eliminating the sluggish feeling caused by the syringe effect.
Material-wise, the POM stem was modified with ceramic powder added to increase its hardness and lower POM's surface friction coefficient as much as possible.
Cera switch also comes with a different factory lubrication method from previous Keygeek switches: The stem is lubed with dry film. The top housing is dry to get rid of the oily feeling.
Specification
Switch Type: Linear
Manufacturer: Keygeek
Designer: Gearpod
Stem material: Modified POM with Ceramic Powder (Flat Stem Tip)
Top Housing: L4 POM (New top housing mold)
Bottom Housing: L4 POM (New bottom housing mold)
Operating Force: 48±5g
Bottom-out Force: 55±5g
Pre-travel: 2.0mm±0.2
Total Travel: 3.7mm±0.2
Spring: 20mm Single-Stage Spring KOS Wire
Factory Lubed: Yes!
Switch style: MX Style Opening with 5 pin
Switches are sold in last packs of 70.
By purchasing, you agree to our disclaimer for the purchase of mechanical switches.
Switch Disclaimers
Returns and faults
Switches can't be returned or refunded for a change of mind. If a switch isn't working out of the box, let us know, and we'll test it and replace it if it's faulty.
How a switch feels, such as being scratchy, is a matter of preference and not a fault, it isn't grounds for a refund or exchange.
Before you buy
Please check your keyboard before you buy, as we can't take back switches that don't fit or work with it:
- Your PCB needs to be hot-swap or for soldering.
- Standard MX-style switches only work on standard PCBs, and optical switches only on optical PCBs.
- Magnetic (Hall effect) switches only work on Hall effect PCBs.
- Outemu hot-swap sockets are smaller than standard ones and won't take standard switch pins.
If unsure, please reach out to us or the keyboard manufacturer/ vendor that you have purchased the PCB/ keyboard from.
Switches are sold in packs, and the price shown is for the whole pack. Each listing says how many switches are in its pack. We recommend buying a few extra in case some are lost to modding.
Modifying switches
Modifying a switch, such as lubing, filming, clipping its pins or changing its spring, voids its warranty.
If your keyboard takes 3-pin switches, you may clip the two plastic side pins off 5-pin switches with flush cutters. Test the switches first: clipping is a modification and voids the warranty.
What's normal
Switch pins can bend in transit. A bent pin isn't a defect: straighten it gently with tweezers before fitting the switch, pressing a bent pin into a hot-swap socket can damage the socket. If you're unsure, reach out to us and we'll help.
Plastics can show small cosmetic marks, such as flow lines, weld lines, sink marks and flashing. These are not defects.
Fees, cancellation windows and reporting times are in our Refund Policy.
