BSUN
BSUN Strawberry Cheesecake V2 Tactile Switches
Description
BSUN Strawberry Cheesecake Switch by TORO Studio, a tactile masterpiece blending the indulgence of strawberry cheesecake with the satisfying feel of the Holy Panda switch. Crafted for enduring comfort and performance, it boasts a slightly more pronounced profile than the Drop Holy Panda and a rounded feel reminiscent of the BSUN Hutt.
Difference between V1 and V2:
- Improved bottom mold housing to better sit into plates
- Changed to single stage spring to eliminate spring crunch
- Change of switch leaf
- Lube applied on stem legs to help eliminate leaf sounds
Speficications
- Tactile switch using holy panda mold (5 pins version)
- Top housing material: POK
- Bottom housing material: POK
- Stem material: LY
- Stem length: 13.7mm
- Springs: Single 60g. Bottom out 58g.
- Factory lubricated: using on bottom housing stem rail, 2 sides of stem, no lubricant on stem legs. Springs was lubed with oil
- Total travel 3.2mm
- Switch style: MX Style Opening with 5 pin
Switch colour:
- Top housing colour: Pantone 11-0510 TPG
- Bottom housing colour: Pantone 4026C
- Stem colour: Pantone 19-1763 TPG
Switches are sold in last bags of 44.
1 Qty = 44 Switches.
Switch Disclaimers
Returns and faults
Switches can't be returned or refunded for a change of mind. If a switch isn't working out of the box, let us know, and we'll test it and replace it if it's faulty.
How a switch feels, such as being scratchy, is a matter of preference and not a fault, it isn't grounds for a refund or exchange.
Before you buy
Please check your keyboard before you buy, as we can't take back switches that don't fit or work with it:
- Your PCB needs to be hot-swap or for soldering.
- Standard MX-style switches only work on standard PCBs, and optical switches only on optical PCBs.
- Magnetic (Hall effect) switches only work on Hall effect PCBs.
- Outemu hot-swap sockets are smaller than standard ones and won't take standard switch pins.
If unsure, please reach out to us or the keyboard manufacturer/ vendor that you have purchased the PCB/ keyboard from.
Switches are sold in packs, and the price shown is for the whole pack. Each listing says how many switches are in its pack. We recommend buying a few extra in case some are lost to modding.
Modifying switches
Modifying a switch, such as lubing, filming, clipping its pins or changing its spring, voids its warranty.
If your keyboard takes 3-pin switches, you may clip the two plastic side pins off 5-pin switches with flush cutters. Test the switches first: clipping is a modification and voids the warranty.
What's normal
Switch pins can bend in transit. A bent pin isn't a defect: straighten it gently with tweezers before fitting the switch, pressing a bent pin into a hot-swap socket can damage the socket. If you're unsure, reach out to us and we'll help.
Plastics can show small cosmetic marks, such as flow lines, weld lines, sink marks and flashing. These are not defects.
Fees, cancellation windows and reporting times are in our Refund Policy.
