HMX
HMX Emo Linear Mechanical Switch
products.product.pickup_availability.unavailable
Description
The EMO switches sound and feel quite different from most HMX offerings as they are neither too loud nor too high-pitched.
They sound rather clacky but still bright and joyful to listen to, with a softer bottom-out, making them really nice to type on.
1 qty = 109 switches
If you're looking for them to be hand lubricated, do reach out to us for quote.
- Linear
- Operating Force: 40±5g
- Bottom-out Force: ±5g
- Pre-travel: 2.0±0.5mm
- Total-travel 3.65±0.3mm
- Spring: 22mm single-stage spring
- Top: PC
- Bottom: P2
- Stem: LY
- 5 pin
- Factory Lubed
- Manufactured by HMX
Switch style: MX Style Opening with 5 pins
Sold as one bag of 109 switches.
By purchasing, you agree to our disclaimer for the purchase of mechanical switches.
Switch Disclaimers
Returns and faults
Switches can't be returned or refunded for a change of mind. If a switch isn't working out of the box, let us know, and we'll test it and replace it if it's faulty.
How a switch feels, such as being scratchy, is a matter of preference and not a fault, it isn't grounds for a refund or exchange.
Before you buy
Please check your keyboard before you buy, as we can't take back switches that don't fit or work with it:
- Your PCB needs to be hot-swap or for soldering.
- Standard MX-style switches only work on standard PCBs, and optical switches only on optical PCBs.
- Magnetic (Hall effect) switches only work on Hall effect PCBs.
- Outemu hot-swap sockets are smaller than standard ones and won't take standard switch pins.
If unsure, please reach out to us or the keyboard manufacturer/ vendor that you have purchased the PCB/ keyboard from.
Switches are sold in packs, and the price shown is for the whole pack. Each listing says how many switches are in its pack. We recommend buying a few extra in case some are lost to modding.
Modifying switches
Modifying a switch, such as lubing, filming, clipping its pins or changing its spring, voids its warranty.
If your keyboard takes 3-pin switches, you may clip the two plastic side pins off 5-pin switches with flush cutters. Test the switches first: clipping is a modification and voids the warranty.
What's normal
Switch pins can bend in transit. A bent pin isn't a defect: straighten it gently with tweezers before fitting the switch, pressing a bent pin into a hot-swap socket can damage the socket. If you're unsure, reach out to us and we'll help.
Plastics can show small cosmetic marks, such as flow lines, weld lines, sink marks and flashing. These are not defects.
Fees, cancellation windows and reporting times are in our Refund Policy.








