Kailh
Kailh BCP (Black Cherry Pie) Linear Switches
products.product.pickup_availability.unavailable
Description
The Kailh BCPs are not the first attempt at someone trying to re-create the cult favorite BCP switches.
Only this time, we have the SAME cream stem as the original franken BCP as Kailh manufactures Cream switches used in the original recipe.
More R&D has also been done with the housing materials and molds to polish things up. This switch offers:
1) Same molding texture and runners as the Cherry top housing to retain signature stem tolerance and hand feel.
2) Thickened bottom housing to achieve 3.5mm of travel distance, resulting in a fuller and more vibrant bottom-out sound.
3) Unchanged original 13.42mm of MX Cream Stem Length - SEDAP
Additional information:
Materials:
Housing materials are another point of consideration;
The original Cherry top housing is made PA66 from Covestro AG (Former name: Bayer MaterialScience Co.), and the JWK H1 bottom housing was made using JWK's PA66.
Although Kailh doesn't use the same supplier as Cherry or JWK, PA66 is very common in this hobby even though there might be some minute changes in its composition across manufacturers.
Off Studio and Kailh made sure to use a similar grade of PA66 to manufacture Kailh BCP switches, and they also stressed the fact that the PA66 housing does not come with fiberglass added.
1. Kailh BCP sounds a bit louder than the original ones
2. Kailh BCP is smoother while noticeable scratch is maintained
3. Kailh BCP has a thickened bottom housing
4. Kailh BCP has a longer travel distance
5. Not original Cherry top and H1 bottom
1 Quantity = 37 Switch
- Top Housing: Nylon PA66 (Same texture as Cherry switches)
- Stem: Dupont POM (MX Cream Stem)
- Bottom Housing: PA66 (thickened)
- Spring: 20mm Single-Stage extended spring
- Pre-travel: 1.4mm±0.2mm
- Total travel: 3.5±0.2mm
- Actuation Force: 52±5g
- Bottom out: 63.5±5g
- Long pole: Yes
Factory Lubed: Yes!
Switch style: MX Style Opening with 5 pin
By purchasing, you agree to our disclaimer for the purchase of mechanical switches.
Switch Disclaimers
Returns and faults
Switches can't be returned or refunded for a change of mind. If a switch isn't working out of the box, let us know, and we'll test it and replace it if it's faulty.
How a switch feels, such as being scratchy, is a matter of preference and not a fault, it isn't grounds for a refund or exchange.
Before you buy
Please check your keyboard before you buy, as we can't take back switches that don't fit or work with it:
- Your PCB needs to be hot-swap or for soldering.
- Standard MX-style switches only work on standard PCBs, and optical switches only on optical PCBs.
- Magnetic (Hall effect) switches only work on Hall effect PCBs.
- Outemu hot-swap sockets are smaller than standard ones and won't take standard switch pins.
If unsure, please reach out to us or the keyboard manufacturer/ vendor that you have purchased the PCB/ keyboard from.
Switches are sold in packs, and the price shown is for the whole pack. Each listing says how many switches are in its pack. We recommend buying a few extra in case some are lost to modding.
Modifying switches
Modifying a switch, such as lubing, filming, clipping its pins or changing its spring, voids its warranty.
If your keyboard takes 3-pin switches, you may clip the two plastic side pins off 5-pin switches with flush cutters. Test the switches first: clipping is a modification and voids the warranty.
What's normal
Switch pins can bend in transit. A bent pin isn't a defect: straighten it gently with tweezers before fitting the switch, pressing a bent pin into a hot-swap socket can damage the socket. If you're unsure, reach out to us and we'll help.
Plastics can show small cosmetic marks, such as flow lines, weld lines, sink marks and flashing. These are not defects.
Fees, cancellation windows and reporting times are in our Refund Policy.








