![Snow Crash V2 [Rail Bottom Out] Linear Switches](http://ktechs.store/cdn/shop/files/12_383521fa-3d87-48c8-87a1-d4191281d07a.webp?v=1734106050&width=375)
HMX
products.product.pickup_availability.unavailable
Description
These HMX Snow Crash V2 switches are the new batch sent out with the intended lubrication by the designer - 205G0 on the leaf, with dry-film on the springs. There is no additional lubrication applied to the stem, bottom, and top housing.
HMX Snow Crash switch, designed by Keebscape, is the first ever rail bottom-out HMX switch.
It has a full 4mm total travel, traditional PA66 housing and POM stem, with an all black housing and a white stem.
Unlike the traditional HMX switches, these switches bottom out on the rails producing a deeper, and rounder bottom out sound.
The Snow Crash V2 has been manufactured with an extremely tight stem, and near-to-zero stem wobble and designed to not suffer from the "syringe effect", with the restricted movement of the stem pole.
These switches are smooth out of the box attributed to HMX's precise moulding and selective factory lubrication.
-
Switch Type: Linear
Designer: Keebscape.Co
Manufacturer: HMX
Stem material: POM (12.75mm long)
Top Housing: PA66
Bottom Housing: PA66
Operating Force: 50±2g
Bottom-out Force: 58±2g
Pre-travel: 2.0mm
Total Travel: 4.0±0.2mm
Spring: 22mm KOS single-stage extended
Factory Lubed: As intended
By purchasing, you agree to our disclaimer for the purchase of mechanical switches.
Switch Disclaimers
Returns and faults
Switches can't be returned or refunded for a change of mind. If a switch isn't working out of the box, let us know, and we'll test it and replace it if it's faulty.
How a switch feels, such as being scratchy, is a matter of preference and not a fault, it isn't grounds for a refund or exchange.
Before you buy
Please check your keyboard before you buy, as we can't take back switches that don't fit or work with it:
- Your PCB needs to be hot-swap or for soldering.
- Standard MX-style switches only work on standard PCBs, and optical switches only on optical PCBs.
- Magnetic (Hall effect) switches only work on Hall effect PCBs.
- Outemu hot-swap sockets are smaller than standard ones and won't take standard switch pins.
If unsure, please reach out to us or the keyboard manufacturer/ vendor that you have purchased the PCB/ keyboard from.
Switches are sold in packs, and the price shown is for the whole pack. Each listing says how many switches are in its pack. We recommend buying a few extra in case some are lost to modding.
Modifying switches
Modifying a switch, such as lubing, filming, clipping its pins or changing its spring, voids its warranty.
If your keyboard takes 3-pin switches, you may clip the two plastic side pins off 5-pin switches with flush cutters. Test the switches first: clipping is a modification and voids the warranty.
What's normal
Switch pins can bend in transit. A bent pin isn't a defect: straighten it gently with tweezers before fitting the switch, pressing a bent pin into a hot-swap socket can damage the socket. If you're unsure, reach out to us and we'll help.
Plastics can show small cosmetic marks, such as flow lines, weld lines, sink marks and flashing. These are not defects.
Fees, cancellation windows and reporting times are in our Refund Policy.
